How To Start Stihl Weed Eater

How To Start Stihl Weed Eater

When it comes to considering the best weed eater, Stihl weed eater comes to the first list. But knowing how to start a Stihl weed eater is very important. Starting of a Stihl weed eater may vary depending on the model.

Stihl weed eaters have two models: Electric and Gas-powered. Although electric models are simple to start, gas-powered models are a little bit weary. Well! Let us talk about the starting procedures through a step-by-step guide.

Go through the post and get the easiest 6 steps to start your Stihl weed eater effortlessly. We guarantee that you are going to love this. Let’s dive in:

How To Start A Stihl Weed Eater Following 6 Simple Steps:

Step 1: Fill the tank with fuel:

The fuel tank should be filled with fuel. So, at first, discard the filler cap and check out the fuel tank if there is enough fuel in the tank. If you notice the fuel tank is empty, fill the tank properly.

If you own a gas-powered Stihl weed eater, you need to apply a 50:1 gasoline-oil fuel mixture. But when you are using an electric model, this step is not needed. Keep in mind to shift the weed eater 10 feet away from the fuel tank before starting the Stihl weed eater. This will prevent you from serious incidents.

Step 2: Make sure to check out the surroundings:

This step is very important before starting the weed eater. Don’t forget to have a look at your surroundings. Because the Stihl weed eater turns so rapidly when you start it. Keep the weed eater away from any foreign objects. Don’t allow any person within 50 feet when you are about to start the Stihl weed eater.

Make sure to take all preventive measures. Don’t forget to wear a face mask, gloves, goggles, apron, and other protection wears. You can also wear protective headphones to prevent hearing loss.

Step 3: Turn on the switch button:

You will find a lockout lever most precisely in a Stihl weed eater. The lockout lever is also called the throttle trigger interlock. First of all, you need to hold down the interlock and press the trigger button.

Typically in gas-powered weed eaters, the trigger interlock is marked with an “I” symbol. Trigger the button and move the starter to the “ON” position. Do the process using your hand with minimal pressure. Don’t attempt to turn on the switch with mega force. It can damage the other accessories of weed eaters.

Step 4: Fix the choke:

In this step, you need to fix the choke. Don’t forget to cool down the engine first before setting the choke. For a cooled engine, shift the choke switches to the entire “Choke” position. Whereas push the choke button to the “Half-choke” position if the engine is hot. Keep filling the fuel tank through the fuel bulb. Don’t forget to push the decompression value button before starting the weed eater if there is any.

Step 5: Drag The weed eater on the floor:

Set the weed eater on the floor on the other side of the starter suction handle so that you can snooze smoothly on its deflector. Never allow the weed eater to touch the floor or other foreign object.

Step 6: Haul the starting cord:

Drag the starter cord carefully until you get desired friction. Gradually give it a quick jerk. Insert the string carefully into the housing in order to prevent it from tangling. Pull out the starter grip quickly at least 4 times. After that, sift the choke button to the “Middle” position.

Attempt to crank the engine by pulling it sharply. Keep doing the process until it releases.  Then the engine will start. When the engine of the weed eater starts, set the engine to the ideal position by pushing the throttle trigger button.

These simple 6 steps are all about how to start a Stihl weed eater quickly. The steps are very easy if you follow the instructions carefully. Keep in mind to take protective measures to prevent possible damages.

Frequently Asked Questions (FAQs):

How do I bump feed my Stihl trimmer?

Place the trimmer head above the floor. Then turn out the trimmer head by pressing the trigger throttle. Fasten the trigger throttle underneath the floor and bump the head by tapping the button below the trimmer head. Finally, feed new strings to the trimmer head.

How do I restring a Stihl trimmer?

Follow the described instructions to restring a Stihl trimmer:

  • First, turn off the trimmer.
  • Cool down the engine.
  • Remove the retaining cap from the spool.
  • Trim the new strings about 25 feet long.
  • Wrinkle the new strings in half.
  • Then, grab the inner reel and wrap the strings alongside the eyelets.

What is the biggest Stihl trimmer?

Stihl FS 240 is one of the biggest Stihl trimmers. It is a professional-grade trimmer that comes with a heavy-duty design. Being durable than other models, it can do heavy-duty jobs and deal with challenging situations. That’s why it is called the biggest model of Stihl trimmer.

Are Stihl trimmers worth the money?

Stihl trimmers are the best choice for a professional gardener who used to do heavy-duty jobs. Stihl trimmers are professional-grade gardening tools that are designed to deal with challenging situations. Homeowners who don’t want to sacrifice quality, go for those trimmers.

Final Verdict:

Go through this post about how to start a Stihl weed eater in only 6 steps. Knowing the right starting procedures can save you time and protect you from possible dangers as well. Last but not least, be sure to wear protective clothing like a face mask, eye protection, hand gloves, etc, when attempting to start the Stihl weed eater. Don’t forget that “Safety First”. Well, luckily you are getting the right solutions here. So, do follow the instructions and start working with your Stihl weed eater.

User Review
5 (1 vote)